Like us

You money here!!!

Friday, May 10, 2013

Arcam rBlink review: add Bluetooth streaming to any hi-fi or dock


Wireless docks and speakers are understandably popular these days. We all carry our music collections (or at least a portion of them) around with us on our smartphone or tablet, and it's inconvenient to have to use a cable or physically dock the device to play music from it.

However, most hi-fi systems and older docks don't have any wireless capabilities. That's where Arcam's rBlink comes in. This dinky Bluetooth receiver lets you add wireless streaming to practically any speaker system with an audio input.


It supports aptX, which is the better quality of the two main Bluetooth standards, so if your device also has aptX support, you'll get the benefit. If not - and unfortunately even the iPhone 5 lacks aptX - you'll have to make do with the standard SBC codec, which offers MP3-like quality.


The rBlink has stereo phono and coaxial digital outputs on one end, and a power socket (for the external power supply), pairing button and aerial at the other. It's a shame the connections aren't all on one side, as there's no easy way to install the rBlink neatly. The external aerial also seems unnecessary and means you can't put the rBlink on a shallow shelf unless the antenna points sideways.

The rBlink isn't something you can really hide away unless you want to make it very awkward to pair any new devices, such as when friends and family visit.

Still, the metal box with its rubber base is sturdily built - helping to justify that high price.

It's simple to pair your device with the rBlink, although the tiny pairing button is hard to press with a finger. It isn't particularly easy to switch between devices, though.

We found the only reliable way was to turn Bluetooth off on the last device that was connected, and then turn it on on the device that next wants to connect. An LED on the rBlink lets you know whether it's currently connected, and glows red when it isn't.


Bluetooth isn't exactly renowned for its audio quality, and you be forgiven for expecting nothing less than excellence for this price. Fortunately, thanks to the aptX support, the rBlink is capable of surprisingly good quality.

Listening to a lossless version of Eric Clapton's Old Love playing through iTunes on a MacBook Air (which supports aptX), there was clear separation between instruments and a good, wide soundstage. Vocals had depth and there was no hint of compression at all. Virtually everyone bar the hardest-to-please audiophile wouldn't know they were listening to audio wirelessly.  
The TI PCM5012 DAC is of course part of the equation, and all of our test tracks sounded rich, whether low, mid or high tones.

By contrast, when we played the same track from an iPhone 4, it sounded thinner and flatter - just as you would expect from the higher compression used by the SBC standard. Still, the quality is better than other standard Bluetooth systems and while it won't please anyone that demands the best, as a convenient alternative to using a cable, it's remarkably good.


Given the quality on offer, £160 doesn't sound quite so bad, but it's still a heck of a lot to pay if you're merely connecting it to a mid-range speaker system or dock that doesn't have Bluetooth. There are also other similar devices, such as the Bayan Streamport Universal, which cost a lot less (watch out for a review shortly).

If on the other hand you have a high-end hi-fi system (the rBlink plays particularly nicely with the FMJ A19, and can even be powered by it) it begins to make more sense. That is, of course, if your playback device supports aptX.

The list is growing, but there are still precious few laptops, tablets and smartphones which do.

As we've said, iPads and iPhones currently don't have aptX support, and if you have one, you're better off buying an Airport Express for half the price as it supports lossless AirPlay. With an AirPort Express, you can also stream music from a NAS.

The rBlink will work with any Bluetooth device, which arguably makes it more flexible, albeit with the caveat that most of those devices won't take advantage of aptX.

One small gripe is that there's no phono to minijack cable included, so you'll need to provide your own if your speaker system doesn't have a phono input or coaxial SPDIF.

View the original article here

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...